TZ-30L-Q5A6-STAGE-1
2009-2017 Audi Q5 / A6 / A7 — 3.0L V6 TDI ECU Tune
- Free Canadian Shipping
- In stock, ready to ship
- Backordered, shipping soon
More power. Less soot. Zero maintenance headaches.
The 3.0L V6 TDI (CPNB/CGQB/CDUC) is a fundamentally capable engine held back by factory calibration that prioritizes emissions compliance over performance. This Tunezilla/Malone ECU tune unlocks what the hardware is already capable of.
Tune calibration by Tunezilla/Malone, Canada’s benchmark for diesel ECU tuning. Sold and supported directly by Valios Dynamics.
Power Figures
| Tune | Horsepower | Torque |
|---|---|---|
| Stock | 240 hp | 332 lb-ft |
| Stage 1 | 289 hp (+49) | 402 lb-ft (+70) |
| Stage 2 | 297 hp (+57) | 411 lb-ft (+79) |
| Stage 2.5 | Factory turbo ceiling | Varies |
Stage 1 — The Daily Driver Sweet Spot
The first unlock from factory calibration. Fuel maps, boost targets, and injection timing are rewritten across the full RPM band. The +49 hp and +70 lb-ft arrive primarily in the mid-range where you actually feel them — pulling harder from 1,800 rpm with a noticeably sharper throttle response. Most drivers report a small improvement in fuel economy under normal driving. Fully compatible with stock hardware. The right pick if you tow regularly or want the best balance of performance and reliability.
Stage 2 — More Up Top
Pushes fueling and boost targets beyond Stage 1, with additional gains concentrated in the upper RPM range. +57 hp / +79 lb-ft over stock. Fuel economy under normal driving remains similar to stock. Temperature parameters are elevated — not recommended for sustained heavy towing. Stock hardware compatible; DPF delete not required but pairs well.
Stage 2.5 — Factory Turbo Ceiling
The maximum calibration the stock turbocharger can support. Extracts every last bit of output from factory hardware while retaining all safety parameters. Best paired with a DPF delete and free-flowing exhaust for full effect. Spirited driving build — towing not advised at this level.
TCU (Transmission) Tune
The ZF8 automatic responds exceptionally well to calibration. Shift points are raised to match the tuned power band, kickdown delay is reduced, and torque converter lockup is optimized. The A6/Q5/A7-specific TCU option adds full calibration for the separate transmission controller on those platforms — required for proper integration on these models.
Tune Add-Ons
Cold climate idle, hardcut rev limiter, dynamic EGR, and glow plug extension are available as separate add-ons — add the 3.0L V6 TDI ECU Tune Add-Ons product to your order and select what you want.
Tune Delivery
Delivered via OBD flash using the Flashzilla Pro — plug into your OBD port and flash from your laptop. A Flashzilla Pro OBD device is required (sold separately) — add it to your order below.
Fitment
2009–2017 Audi Q5 / A6 / A7
Engine: 3.0L V6 TDI (CPNB / CGQB / CDUC)
What’s Included
- ECU tune license for your specific vehicle
- Tune support from Valios Dynamics
For off-road and competition use only. Not for use on public roads where emissions regulations apply.
Questions? Email bentley@valiosdynamics.com or call 778-721-4911.
Orders ship within 5-7 business days if not in stock. Free shipping on Canadian orders over $250 CAD. Flat rate available for smaller orders and US/international destinations.
